Resins FAQ

Most EPS resins are available in bulk and drums, in addition EPS emulsions are available in standard plastic totes.

All EPS emulsions should be protected from freezing and from excessive heat - we recommend storage in the original unopened containers between 5 and 30°C (40 - 90°F). 

EPS can develop custom products to meet specific customer needs - contact your sales representative or customer service for a more in-depth discussion of your requirements.

Yes. EPS only uses formaldehyde free preservatives and strongly recommends the use of additional preservative when formulating finished paints and coatings.

Yes! EPS has been developing solutions to deliver excellent performance at low VOC for many years.  Many resins can be formulated to near-zero VOC levels by using the EPS 9147 coalescent.

In general it is not possible to directly substitue emulsions without some additional reformulation. As a minimum the coalescent and thickener packages should be optimized in order to achieve a similar balance of properties. EPS provides suggested formluations for many of our products which can provide guidance. Contact the technical service department for additional information.

EPS supplies acrylic emulsions and polyurethane dispersions. Browse our product offering.

Yes, contact our customer service department to coordinate the details of your shipment.

Literature is located for each specific product in the Brochures & Product Selectors page of this site. If you have specific requests, contact our customer service department or send an email to info@eps-materials.com.

Yes, however you will most likely use our distributor network, depending on the volume and your product needs. Contact our customer service department to determine the best route to receive product.

Literature is located for each specific product in the product section of the site. If you have specific requests, contact our customer service department.

Contact our technical service department.

Samples can be ordered  for each specific product in the product section of this site. If you have specific requests, contact our customer service department.